1 Module Spur Gear with Step Teeth 10T - 14T Transmission Gear 45# Steel Pinion

Description

1 Module Spur Gear with Step Teeth 10T - 14T Transmission Gear 45# Steel Pinion
Product Information:
Name: 1 Module Spur Gear with Step Teeth 10T - 14T Transmission Gear 45# Steel Pinion
Material: 45# Steel
Module: 1M
Number of teeth: 10 Teeth 12 Teeth 14 Teeth
Bore: 4mm - 7mm
Surface treatment: None
Tip: The size of the inner hole will be different in different batches, and it will be slightly eccentric.
Purchase instructions:
1. The gear is made of 45 steel, and the inner holes are all positive with a tolerance of 0-0.04. There may be a small amount of burrs in stock, which is a normal phenomenon.
2. There are two kinds of gear surface blackening treatment (10 teeth - 35 teeth) and high-frequency quenching (40 teeth - 150 teeth), which are the hardness of 45 steel raw materials. The surface hardness is about 40-45 degrees.
3.1 since the effective tooth height of die 10-14 teeth is 12mm, there are teeth at the remaining positions, but they are not rolled in place, so the two gears are not suitable for parallel engagement.
4. The overall dimension of the gear (except the inner hole accuracy) may change slightly due to different batches. Please refer to the real object! Gear delivery machine screw, locking screw wrench need to be purchased separately, no delivery.
P
a
ckage Including:
According to your choice.
Return Policy:
Not
accept returning of electronic components.
Full refund after we receive our original item,
Note:
Return shipping is to be paid by the Buyer
Feedback:
Feedback is very important to us.
If you are satisfied with the products,I expect you can leave us a positive feedback.
We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Guarantee:
Good Good Good quality. Buy with confidence!
We maintain high standards of excellence and strive for 100% customer satisfaction!